The Graco SaniSpray HP 65 is the ideal disinfectant sprayer solution that delivers maximum productivity on midsized disinfecting jobs. Uniquely built with the highest-grade materials that are compatible with disinfectants, sanitizers and deodorizers.

Airflow : 4,800 CFM @ 14" W.C.

Material Handling : 10,000 + Lbs. / Hour

Total Static Capability : 27" W.C.

Inlet Configuration : 8" x 6" Reducer (Standard), 10" x 8" Reducer (Optional)

Discharge Configuration : 8" Horizontal

Filtration : InsulBag, Insul-Dumpster Cover, Insul-Dumpster Liner, Conventional White Disposable Bags

Max Hose Capability : 300' x 8" Hose, 250' x 6" Hose, 200' x 4" Hose

Gun, Weller® Soldering Kit, Multi-Purpose 75 W, 120 V

Our FORCE/1 package processes up to 970 lbs of cellulose or 350 lbs of fiberglass per hour and weighs 177 lbs. The durability of this unit is enhanced with urethane seals, a direct drive transmission, and polyethylene construction which resists dents & dings, allowing for an attractive system appearance over years of use. This system provides ease of transportation to the job site in addition to timely installation of attic insulation - either cellulose or fiberglass -- at 3/4 of an hour for R-19 in a 1,000 square foot attic.

Use With Flue Brushes, More Rigid Than Twisted Wire Rod.

1/4" NPT Male / Female Thread

Use to clean masonry chimneys.

• Wire Bristles

BRUSH, RND CHIMNEY 8"

Use to clean stainless steel and masonry chimneys.

Gardner Bender's Streamline Steel Fish Tape sets the industry standard for quality and dependability. GB uses a shatterproof reel that stands up to on-the-job abuse and features four viewing points to allow the user to see how much tape remains in the reel. Tape is wound directly into housing with no need to "snap" retaining tapes and no sticky residue inside housing.

The quick, easy way to install cylindrical door locksJig locates quickly for either 2-3/8" or 2-3/4" backsetsAll holes drilled in a single set-upAdjustable for door thicknesses between 1-5/16" and 2-1/8"Includes strike locator for accurate placement of jamb mortiseInstruction sheet included on kit box lid for easy referenceLock boring jig, 1" boring bit, 2-1/8" boring bit, full-up strike mortiser, latch mortiser, maximum security mortiser, striker locator, quick-change drill adapter, and storage case

If there is no water supply nearby, you can use a pressurized water tank. Pumping the handle a few times gives the required pressure. The tank holds 3.5 gallons and comes complete with a 10 ft. hose which is connected to the wet cutting kit on the machine.

The powerful JP Series is ideal for removing dirt, mud, mold and mildew from almost any surface. Contractors love it because its portable design makes it easy to move from one job to the next.

Pump: Equipped with the MI-T-M Pressure Relief Start which eliminates pressure build-up in the system · Forged brass manifold · Thermal relief valve · In-line water strainer

Frame: Powder coated steel frame and base plate with 1-1/4-inch tube handles · Convenient gun/wand holder and hose wrap · 10-inch flat-free tires

Unit Includes: Quick connect nozzles - 0°, 15° and 25° · 50-foot x 3/8-inch non-marking high pressure hose with quick connects · Professional-grade insulated trigger gun with safety lock-off

Green thumb, 30", deluxe bow saw, sk5 high carbon steel rake toothsaw blade, cold rolled steel tubular handle, gray metal with black handle, comfort grip with knuckle protector.

The powerful MK-2000 brick saws features include a unique and innovative open-back design allowing large material to be easily cut. The cast aluminum blade guard has stainless steel water tubes that will not bend or rust. The blade shaft assembly is built with sealed, permanently lubricated, heavy-duty bearings for long maintenance free life. The recoil spring return cutting head makes plunge cutting quick and easy.

The BX-3 series is a portable and lightweight line of masonry saws availabe in either dry cutting or wet cutting models. The open-back design allows for large materials to pass through. Includes a 14" diamond blade.

7-1/4" WORM DRIVE CIRCULAR SAW

With a double-tooth design for long life and extreme durability, DEWALT Bi-Metal Hole Saws power through 2 times the material in a single pass. A sharp tooth geometry expedites cutting, and thick, hardened backing plates helps to prevent thread stripping. A high-speed steel height makes them ideal for tough jobs.

With a double-tooth design for long life and extreme durability, DEWALT Bi-Metal Hole Saws power through 2 times the material in a single pass. A sharp tooth geometry expedites cutting, and thick, hardened backing plates helps to prevent thread stripping. A high-speed steel height makes them ideal for tough jobs.

With a double-tooth design for long life and extreme durability, DEWALT Bi-Metal Hole Saws power through 2 times the material in a single pass. A sharp tooth geometry expedites cutting, and thick, hardened backing plates helps to prevent thread stripping. A high-speed steel height makes them ideal for tough jobs.

With a double-tooth design for long life and extreme durability, DEWALT Bi-Metal Hole Saws power through 2 times the material in a single pass. A sharp tooth geometry expedites cutting, and thick, hardened backing plates helps to prevent thread stripping. A high-speed steel height makes them ideal for tough jobs.

JAMB SAW

11 Amp Sawzall Recip Saw w/Case

Blades For sale

Milwaukee's 11 amp Sawzall® Reciprocating Saw is the most durable reciprocating saw on the market, and at only 7 pounds, it offers the best power to weight ratio in its class. The saw offers a 0-2800 strokes per minute variable speed trigger with 3/4 in. stroke length and a QUIK-LOK™ blade clamp for fast, tool-less blade changes

Master Mechanic; 3/8" x 125'; Bungee Cord Reel.

The DW616 1-3/4 HP Fixed Base Router has the power to rout smoothly through hardwoods. Provides quick and precise depth adjustments and fast, easy motor pack removal for bit and base changes.